1、安装SAMBA yum -y install samba samba-client samba-common
vi /etc/security/limits.conf 最后添加 * soft nofile 65535 * hard nofile 65535 (需重启机器) 3、配置SAMBA cp /etc/samba/smb.conf /etc/samba/smb.conf.bak #备份 vi/etc/samba/smb.conf 修改为: [global] log file = /var/log/samba/log.%m max log size = 50 security = user map to guest = Bad User#实现无密码访问 [PyDoc] path=/root/PythonProject readonly=yes browseable=yes writable = yes guest ok=yes 4、关闭防火墙
systemctl stop firewalld
systemctl disable firewalld
5、关闭SELinux 修改配置文件需要重启机器: vi /etc/selinux/config 将SELINUX=enforcing 改为SELINUX=disabled (需重启机器) 5、测试配置文件 testparm 6、启动SAMBA
systemctl restart smb #重启
systemctl enable smb #修改为开机启动
systemctl status smb #查看状态
7、在windows下输入\\192.168.49.200访问 a、开启网络发现 b、开启SMBv1 To enable SMBv1 on the SMB client, run the following commands: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb10 start= auto c、开启SMBv1 To enable SMBv2 and SMBv3 on the SMB client, run the following commands: sc.exe config lanmanworkstation depend= bowser/mrxsmb10/mrxsmb20/nsi sc.exe config mrxsmb20 start= auto (责任编辑:IT) |