|
注意：如果用源码安装的话，后面nginx安装的时候需要指定 --with-pcre 对应的压缩包路径，如果用二进制包安装则不需指定 依赖包一键安装： yum -y install zlib zlib-devel openssl openssl--devel pcre pcre-devel
yum -y groupinstall "Development Tools" "Development Libraries" 此命令可以一键安装开发工具包
安装命令： openssl： tar -xzvf openssl-1.0.1.tar.gz cd openssl-1.0.1 ./config(注意) && make && make install pcre: tar -xzvf pcre-8.21.tar.gz cd pcre-8.21 ./configure && make && make install zlib: tar -xzvf zlib-1.2.8.tar.gz cd zlib-1.2.8 ./configure && make && make install
nginx安装命令： nginx各个版本下载地址：http://nginx.org/download/ groupadd -r nginx useradd -r -g nginx -s /bin/false -M nginx #注意 \ 前面至少一个有空格 ./configure --sbin-path=/usr/local/nginx/nginx \ --conf-path=/usr/local/nginx/nginx.conf \ --pid-path=/usr/local/nginx/nginx.pid \ --with-http_ssl_module \ --with-pcre=../pcre-8.21 \ #指向解压的源码目录 --with-zlib=../zlib-1.2.8 \ #指向解压的源码目录 --with-openssl=../openssl-1.0.1 \ #指向解压的源码目录 --with-http_stub_status_module \#启用 nginx 的 NginxStatus 功能，用来监控 Nginx 的当前状态 --user=nginx \ --group=nginx 注：编译好的nginx可以通过 /usr/local/nginx/nginx -V （具体路径以安装的为主） 查看编译时候的参数
启动nginx /usr/local/nginx/nginx #不指定配置文件地址 /usr/local/nginx/nginx -c /usr/local/nginx/nginx.conf #指定配置文件地址
停止服务 sudo kill `cat /usr/local/nginx/nginx.pid`
服务控制脚本（todo）
浏览器中输入localhost如果可以看到欢迎界面则安装成功
虚拟主机配置 只需更改 server_name 为对应的网站域名即可
检测配置文件 /usr/local/nginx/nginx -t
重新加载配置文件(不停止服务) /usr/local/nginx/nginx -s reload
打开目录浏览功能
location / {
autoindex on;#打开目录列表
autoindex_exact_size off; #on显示文件的确切大小，off则会用M、G等单位
autoindex_localtime on; #显示文件服务器时间，off显示GMT时间
root html;
index index.html index.htm;
}
Nginx编译参数解析 –prefix #nginx安装目录，默认在/usr/local/nginx –pid-path #pid问件位置，默认在logs目录 –lock-path #lock问件位置，默认在logs目录 –with-http_ssl_module #开启HTTP SSL模块，以支持HTTPS请求。 –with-http_dav_module #开启WebDAV扩展动作模块，可为文件和目录指定权限 –with-http_flv_module #支持对FLV文件的拖动播放 –with-http_realip_module #支持显示真实来源IP地址 –with-http_gzip_static_module #预压缩文件传前检查，防止文件被重复压缩 –with-http_stub_status_module #取得一些nginx的运行状态 –with-mail #允许POP3/IMAP4/SMTP代理模块 –with-mail_ssl_module #允许POP3／IMAP／SMTP可以使用SSL／TLS –with-pcre=../pcre-8.11 #注意是未安装的pcre路径 –with-zlib=../zlib-1.2.5 #注意是未安装的zlib路径 –with-debug #允许调试日志 –http-client-body-temp-path #客户端请求临时文件路径 –http-proxy-temp-path #设置http proxy临时文件路径 –http-fastcgi-temp-path #设置http fastcgi临时文件路径 –http-uwsgi-temp-path=/var/tmp/nginx/uwsgi #设置uwsgi 临时文件路径 –http-scgi-temp-path=/var/tmp/nginx/scgi #设置scgi 临时文件路径
pcre安装日志 pcre-8.21 configuration summary: Install prefix .................. : /usr/local C preprocessor .................. : gcc -E C compiler ...................... : gcc C++ preprocessor ................ : g++ -E C++ compiler .................... : g++ Linker .......................... : /usr/bin/ld C preprocessor flags ............ : C compiler flags ................ : -O2 C++ compiler flags .............. : -O2 Linker flags .................... : Extra libraries ................. : Build C++ library ............... : yes Enable JIT compiling support .... : no Enable UTF-8 support ............ : no Unicode properties .............. : no Newline char/sequence ........... : lf \R matches only ANYCRLF ......... : no EBCDIC coding ................... : no Rebuild char tables ............. : no Use stack recursion ............. : yes POSIX mem threshold ............. : 10 Internal link size .............. : 2 Match limit ..................... : 10000000 Match limit recursion ........... : MATCH_LIMIT Build shared libs ............... : yes Build static libs ............... : yes Use JIT in pcregrep ............. : no Buffer size for pcregrep ........ : 20480 Link pcregrep with libz ......... : no Link pcregrep with libbz2 ....... : no Link pcretest with libreadline .. : no —————————————————————————————————————————————————————————————————————— make[1]: Entering directory `/root/software/pcre-8.21' test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib" /bin/sh ./libtool --mode=install /usr/bin/install -c libpcre.la libpcreposix.la libpcrecpp.la '/usr/local/lib' libtool: install: /usr/bin/install -c .libs/libpcre.so.0.0.1 /usr/local/lib/libpcre.so.0.0.1 libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so.0 || { rm -f libpcre.so.0 && ln -s libpcre.so.0.0.1 libpcre.so.0; }; }) libtool: install: (cd /usr/local/lib && { ln -s -f libpcre.so.0.0.1 libpcre.so || { rm -f libpcre.so && ln -s libpcre.so.0.0.1 libpcre.so; }; }) libtool: install: /usr/bin/install -c .libs/libpcre.lai /usr/local/lib/libpcre.la libtool: install: warning: relinking `libpcreposix.la' libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool --tag CC --mode=relink gcc -O2 -version-info 0:0:0 -o libpcreposix.la -rpath /usr/local/lib pcreposix.lo libpcre.la ) libtool: relink: gcc -shared -fPIC -DPIC .libs/pcreposix.o -Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre -O2 -Wl,-soname -Wl,libpcreposix.so.0 -o .libs/libpcreposix.so.0.0.0 libtool: install: /usr/bin/install -c .libs/libpcreposix.so.0.0.0T /usr/local/lib/libpcreposix.so.0.0.0 libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so.0 || { rm -f libpcreposix.so.0 && ln -s libpcreposix.so.0.0.0 libpcreposix.so.0; }; }) libtool: install: (cd /usr/local/lib && { ln -s -f libpcreposix.so.0.0.0 libpcreposix.so || { rm -f libpcreposix.so && ln -s libpcreposix.so.0.0.0 libpcreposix.so; }; }) libtool: install: /usr/bin/install -c .libs/libpcreposix.lai /usr/local/lib/libpcreposix.la libtool: install: warning: relinking `libpcrecpp.la' libtool: install: (cd /root/software/pcre-8.21; /bin/sh /root/software/pcre-8.21/libtool --tag CXX --mode=relink g++ -O2 -version-info 0:0:0 -o libpcrecpp.la -rpath /usr/local/lib pcrecpp.lo pcre_scanner.lo pcre_stringpiece.lo libpcre.la ) libtool: relink: g++ -fPIC -DPIC -shared -nostdlib /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crti.o /usr/lib/gcc/i686-redhat-linux/4.4.4/crtbeginS.o .libs/pcrecpp.o .libs/pcre_scanner.o .libs/pcre_stringpiece.o -Wl,-rpath -Wl,/usr/local/lib -L/usr/local/lib -lpcre -L/usr/lib/gcc/i686-redhat-linux/4.4.4 -L/usr/lib/gcc/i686-redhat-linux/4.4.4/../../.. -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/i686-redhat-linux/4.4.4/crtendS.o /usr/lib/gcc/i686-redhat-linux/4.4.4/../../../crtn.o -O2 -Wl,-soname -Wl,libpcrecpp.so.0 -o .libs/libpcrecpp.so.0.0.0 libtool: install: /usr/bin/install -c .libs/libpcrecpp.so.0.0.0T /usr/local/lib/libpcrecpp.so.0.0.0 libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so.0 || { rm -f libpcrecpp.so.0 && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so.0; }; }) libtool: install: (cd /usr/local/lib && { ln -s -f libpcrecpp.so.0.0.0 libpcrecpp.so || { rm -f libpcrecpp.so && ln -s libpcrecpp.so.0.0.0 libpcrecpp.so; }; }) libtool: install: /usr/bin/install -c .libs/libpcrecpp.lai /usr/local/lib/libpcrecpp.la libtool: install: /usr/bin/install -c .libs/libpcre.a /usr/local/lib/libpcre.a libtool: install: chmod 644 /usr/local/lib/libpcre.a libtool: install: ranlib /usr/local/lib/libpcre.a libtool: install: /usr/bin/install -c .libs/libpcreposix.a /usr/local/lib/libpcreposix.a libtool: install: chmod 644 /usr/local/lib/libpcreposix.a libtool: install: ranlib /usr/local/lib/libpcreposix.a libtool: install: /usr/bin/install -c .libs/libpcrecpp.a /usr/local/lib/libpcrecpp.a libtool: install: chmod 644 /usr/local/lib/libpcrecpp.a libtool: install: ranlib /usr/local/lib/libpcrecpp.a libtool: finish: PATH="/usr/lib/qt-3.3/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/mysql/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages.
openssl安装日志 [root@localhost openssl-fips-2.0.2]# make install if [ -n "libcrypto" ]; then \ EXCL_OBJ='aes-586.o aesni-x86.o bn-586.o co-586.o x86-mont.o x86-gf2m.o des-586.o crypt586.o x86cpuid.o sha1-586.o sha256-586.o sha512-586.o ghash-x86.o ../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' ; export EXCL_OBJ ; \ ARX='/usr/bin/perl ${TOP}/util/arx.pl ar r' ; \ else \ ARX='ar r' ; \ fi ; export ARX ; \ if [ y = "y" ]; then \ AS='/usr/bin/perl ${TOP}/util/fipsas.pl ${TOP} ${<} gcc' ; \ else \ AS='gcc -c' ; \ fi ; export AS ; \ dir=crypto; target=fips; if expr " crypto fips test " : ".* $dir " >/dev/null 2>&1; then if [ -d "$dir" ]; then ( cd $dir && echo "making $target in $dir..." && TOP= && unset TOP ${LIB+LIB} ${LIBS+LIBS} ${INCLUDE+INCLUDE} ${INCLUDES+INCLUDES} ${DIR+DIR} ${DIRS+DIRS} ${SRC+SRC} ${LIBSRC+LIBSRC} ${LIBOBJ+LIBOBJ} ${ALL+ALL} ${EXHEADER+EXHEADER} ${HEADER+HEADER} ${GENERAL+GENERAL} ${CFLAGS+CFLAGS} ${ASFLAGS+ASFLAGS} ${AFLAGS+AFLAGS} ${LDCMD+LDCMD} ${LDFLAGS+LDFLAGS} ${SHAREDCMD+SHAREDCMD} ${SHAREDFLAGS+SHAREDFLAGS} ${SHARED_LIB+SHARED_LIB} ${LIBEXTRAS+LIBEXTRAS} && make -e PLATFORM='linux-elf' PROCESSOR='' CC='gcc' CFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM' ASFLAG='-DOPENSSL_FIPSCANISTER -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -Wa,--noexecstack -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -c' AR='ar r' NM='nm' RANLIB='/usr/bin/ranlib' CROSS_COMPILE='' PERL='/usr/bin/perl' ENGDIRS='ccgost' SDIRS='sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac' LIBRPATH='/usr/local/ssl/fips-2.0/lib' INSTALL_PREFIX='' INSTALLTOP='/usr/local/ssl/fips-2.0' OPENSSLDIR='/usr/local/ssl/fips-2.0' LIBDIR='lib' MAKEDEPEND='$${TOP}/util/domd $${TOP} -MD gcc' DEPFLAG='-DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_BF -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAST -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_IDEA -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_MD5 -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC2 -DOPENSSL_NO_RC4 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_RIPEMD -DOPENSSL_NO_SEED -DOPENSSL_NO_SRP -DOPENSSL_NO_SSL2 -DOPENSSL_NO_SSL3 -DOPENSSL_NO_STORE -DOPENSSL_NO_TLS1 -DOPENSSL_NO_TLSEXT' MAKEDEPPROG='gcc' SHARED_LDFLAGS='' KRB5_INCLUDES='' LIBKRB5='' ZLIB_INCLUDE='' LIBZLIB='' EXE_EXT='' SHARED_LIBS='libcrypto.so.1.1.0 libssl.so.1.1.0' SHLIB_EXT='.so.1.1.0' SHLIB_TARGET='linux-shared' PEX_LIBS='' EX_LIBS='-ldl' CPUID_OBJ='x86cpuid.o' BN_ASM='bn-586.o co-586.o x86-mont.o x86-gf2m.o' DES_ENC='des-586.o crypt586.o' AES_ENC='aes-586.o aesni-x86.o' CMLL_ENC='cmll-x86.o' BF_ENC='bf-586.o' CAST_ENC='c_enc.o' RC4_ENC='rc4-586.o' RC5_ENC='rc5-586.o' SHA1_ASM_OBJ='sha1-586.o sha256-586.o sha512-586.o' MD5_ASM_OBJ='md5-586.o' RMD160_ASM_OBJ='rmd-586.o' WP_ASM_OBJ='wp_block.o wp-mmx.o' MODES_ASM_OBJ='ghash-x86.o' PERLASM_SCHEME='elf' FIPSLIBDIR='' FIPSCANLIB="${FIPSCANLIB:-libcrypto}" FIPSCANISTERINTERNAL='y' FIPSCANISTERONLY='y' FIPS_EX_OBJ='../crypto/aes/aes_cfb.o ../crypto/aes/aes_ecb.o ../crypto/aes/aes_ofb.o ../crypto/bn/bn_add.o ../crypto/bn/bn_blind.o ../crypto/bn/bn_ctx.o ../crypto/bn/bn_div.o ../crypto/bn/bn_exp2.o ../crypto/bn/bn_exp.o ../crypto/bn/bn_gcd.o ../crypto/bn/bn_gf2m.o ../crypto/bn/bn_lib.o ../crypto/bn/bn_mod.o ../crypto/bn/bn_mont.o ../crypto/bn/bn_mul.o ../crypto/bn/bn_nist.o ../crypto/bn/bn_prime.o ../crypto/bn/bn_rand.o ../crypto/bn/bn_recp.o ../crypto/bn/bn_shift.o ../crypto/bn/bn_sqr.o ../crypto/bn/bn_word.o ../crypto/bn/bn_x931p.o ../crypto/buffer/buf_str.o ../crypto/cmac/cmac.o ../crypto/cryptlib.o ../crypto/des/cfb64ede.o ../crypto/des/cfb64enc.o ../crypto/des/cfb_enc.o ../crypto/des/ecb3_enc.o ../crypto/des/ofb64ede.o ../crypto/des/fcrypt.o ../crypto/des/set_key.o ../crypto/dh/dh_check.o ../crypto/dh/dh_gen.o ../crypto/dh/dh_key.o ../crypto/dsa/dsa_gen.o ../crypto/dsa/dsa_key.o ../crypto/dsa/dsa_ossl.o ../crypto/ec/ec_curve.o ../crypto/ec/ec_cvt.o ../crypto/ec/ec_key.o ../crypto/ec/ec_lib.o ../crypto/ec/ecp_mont.o ../crypto/ec/ec_mult.o ../crypto/ec/ecp_nist.o ../crypto/ec/ecp_smpl.o ../crypto/ec/ec2_mult.o ../crypto/ec/ec2_smpl.o ../crypto/ecdh/ech_key.o ../crypto/ecdh/ech_ossl.o ../crypto/ecdsa/ecs_ossl.o ../crypto/evp/e_aes.o ../crypto/evp/e_des3.o ../crypto/evp/e_null.o ../crypto/evp/m_sha1.o ../crypto/evp/m_dss1.o ../crypto/evp/m_dss.o ../crypto/evp/m_ecdsa.o ../crypto/hmac/hmac.o ../crypto/modes/cbc128.o ../crypto/modes/ccm128.o ../crypto/modes/cfb128.o ../crypto/modes/ctr128.o ../crypto/modes/gcm128.o ../crypto/modes/ofb128.o ../crypto/modes/xts128.o ../crypto/rsa/rsa_eay.o ../crypto/rsa/rsa_gen.o ../crypto/rsa/rsa_crpt.o ../crypto/rsa/rsa_none.o ../crypto/rsa/rsa_oaep.o ../crypto/rsa/rsa_pk1.o ../crypto/rsa/rsa_pss.o ../crypto/rsa/rsa_ssl.o ../crypto/rsa/rsa_x931.o ../crypto/rsa/rsa_x931g.o ../crypto/sha/sha1dgst.o ../crypto/sha/sha256.o ../crypto/sha/sha512.o ../crypto/thr_id.o ../crypto/uid.o' THIS=${THIS:-build_crypto} MAKEFILE=Makefile MAKEOVERRIDES= TOP=.. DIR=$dir $target ) || exit 1; fi; fi making fips in crypto... make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto' [ -n "sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac" ] && for i in sha hmac des aes modes bn ec rsa dsa ecdsa dh buffer evp ecdh cmac ; do \ ( obj=`/usr/bin/perl ../util/fipsobj.pl $i` && \ cd $i && echo "making fips in crypto/$i..." && \ make -e TOP=../.. DIR=$i INCLUDES='-I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include ' $obj ) || exit 1; \ done; making fips in crypto/sha... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha' make[2]: “sha1dgst.o”是最新的。 make[2]: “sha256.o”是最新的。 make[2]: “sha512.o”是最新的。 make[2]: “sha1-586.o”是最新的。 make[2]: “sha256-586.o”是最新的。 make[2]: “sha512-586.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha' making fips in crypto/hmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac' make[2]: “hmac.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac' making fips in crypto/des... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des' make[2]: “cfb64ede.o”是最新的。 make[2]: “cfb64enc.o”是最新的。 make[2]: “cfb_enc.o”是最新的。 make[2]: “ecb3_enc.o”是最新的。 make[2]: “ofb64ede.o”是最新的。 make[2]: “fcrypt.o”是最新的。 make[2]: “set_key.o”是最新的。 make[2]: “des-586.o”是最新的。 make[2]: “crypt586.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des' making fips in crypto/aes... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes' make[2]: “aes_cfb.o”是最新的。 make[2]: “aes_ecb.o”是最新的。 make[2]: “aes_ofb.o”是最新的。 make[2]: “aes-586.o”是最新的。 make[2]: “aesni-x86.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes' making fips in crypto/modes... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes' make[2]: “cbc128.o”是最新的。 make[2]: “ccm128.o”是最新的。 make[2]: “cfb128.o”是最新的。 make[2]: “ctr128.o”是最新的。 make[2]: “gcm128.o”是最新的。 make[2]: “ofb128.o”是最新的。 make[2]: “xts128.o”是最新的。 make[2]: “ghash-x86.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes' making fips in crypto/bn... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn' make[2]: “bn_add.o”是最新的。 make[2]: “bn_blind.o”是最新的。 make[2]: “bn_ctx.o”是最新的。 make[2]: “bn_div.o”是最新的。 make[2]: “bn_exp2.o”是最新的。 make[2]: “bn_exp.o”是最新的。 make[2]: “bn_gcd.o”是最新的。 make[2]: “bn_gf2m.o”是最新的。 make[2]: “bn_lib.o”是最新的。 make[2]: “bn_mod.o”是最新的。 make[2]: “bn_mont.o”是最新的。 make[2]: “bn_mul.o”是最新的。 make[2]: “bn_nist.o”是最新的。 make[2]: “bn_prime.o”是最新的。 make[2]: “bn_rand.o”是最新的。 make[2]: “bn_recp.o”是最新的。 make[2]: “bn_shift.o”是最新的。 make[2]: “bn_sqr.o”是最新的。 make[2]: “bn_word.o”是最新的。 make[2]: “bn_x931p.o”是最新的。 make[2]: “bn-586.o”是最新的。 make[2]: “co-586.o”是最新的。 make[2]: “x86-mont.o”是最新的。 make[2]: “x86-gf2m.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn' making fips in crypto/ec... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec' make[2]: “ec_curve.o”是最新的。 make[2]: “ec_cvt.o”是最新的。 make[2]: “ec_key.o”是最新的。 make[2]: “ec_lib.o”是最新的。 make[2]: “ecp_mont.o”是最新的。 make[2]: “ec_mult.o”是最新的。 make[2]: “ecp_nist.o”是最新的。 make[2]: “ecp_smpl.o”是最新的。 make[2]: “ec2_mult.o”是最新的。 make[2]: “ec2_smpl.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec' making fips in crypto/rsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa' make[2]: “rsa_eay.o”是最新的。 make[2]: “rsa_gen.o”是最新的。 make[2]: “rsa_crpt.o”是最新的。 make[2]: “rsa_none.o”是最新的。 make[2]: “rsa_oaep.o”是最新的。 make[2]: “rsa_pk1.o”是最新的。 make[2]: “rsa_pss.o”是最新的。 make[2]: “rsa_ssl.o”是最新的。 make[2]: “rsa_x931.o”是最新的。 make[2]: “rsa_x931g.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa' making fips in crypto/dsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa' make[2]: “dsa_gen.o”是最新的。 make[2]: “dsa_key.o”是最新的。 make[2]: “dsa_ossl.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa' making fips in crypto/ecdsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa' make[2]: “ecs_ossl.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa' making fips in crypto/dh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh' make[2]: “dh_check.o”是最新的。 make[2]: “dh_gen.o”是最新的。 make[2]: “dh_key.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh' making fips in crypto/buffer... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer' make[2]: “buf_str.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer' making fips in crypto/evp... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp' make[2]: “e_aes.o”是最新的。 make[2]: “e_des3.o”是最新的。 make[2]: “e_null.o”是最新的。 make[2]: “m_sha1.o”是最新的。 make[2]: “m_dss1.o”是最新的。 make[2]: “m_dss.o”是最新的。 make[2]: “m_ecdsa.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp' making fips in crypto/ecdh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh' make[2]: “ech_key.o”是最新的。 make[2]: “ech_ossl.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh' making fips in crypto/cmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac' make[2]: “cmac.o”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac' make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto' making all in fips... make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips' make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips' making all in fips/sha... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha' making all in fips/rand... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand' making all in fips/des... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des' making all in fips/aes... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes' making all in fips/dsa... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa' making all in fips/ecdh... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh' making all in fips/ecdsa... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa' making all in fips/rsa... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa' making all in fips/dh... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh' making all in fips/cmac... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac' making all in fips/hmac... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac' making all in fips/utl... make[3]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl' make[2]: “lib”是最新的。 make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips' make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips' created directory `/usr/local/ssl' created directory `/usr/local/ssl/fips-2.0' created directory `/usr/local/ssl/fips-2.0/bin' created directory `/usr/local/ssl/fips-2.0/lib' created directory `/usr/local/ssl/fips-2.0/include' created directory `/usr/local/ssl/fips-2.0/include/openssl' making install in crypto... make[1]: Entering directory `/root/software/openssl-fips-2.0.2/crypto' making install in crypto/sha... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/sha' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/sha' making install in crypto/hmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/hmac' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/hmac' making install in crypto/des... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/des' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/des' making install in crypto/aes... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/aes' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/aes' making install in crypto/modes... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/modes' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/modes' making install in crypto/bn... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/bn' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/bn' making install in crypto/ec... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ec' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ec' making install in crypto/rsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/rsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/rsa' making install in crypto/dsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dsa' making install in crypto/ecdsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdsa' making install in crypto/dh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/dh' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/dh' making install in crypto/buffer... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/buffer' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/buffer' making install in crypto/evp... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/evp' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/evp' making install in crypto/ecdh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/ecdh' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/ecdh' making install in crypto/cmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/crypto/cmac' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto/cmac' make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/crypto' making install in fips... make[1]: Entering directory `/root/software/openssl-fips-2.0.2/fips' making install in fips/sha... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/sha' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/sha' making install in fips/rand... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rand' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rand' making install in fips/des... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/des' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/des' making install in fips/aes... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/aes' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/aes' making install in fips/dsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dsa' making install in fips/ecdh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdh' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdh' making install in fips/ecdsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/ecdsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/ecdsa' making install in fips/rsa... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/rsa' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/rsa' making install in fips/dh... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/dh' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/dh' making install in fips/cmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/cmac' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/cmac' making install in fips/hmac... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/hmac' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/hmac' making install in fips/utl... make[2]: Entering directory `/root/software/openssl-fips-2.0.2/fips/utl' make[2]: Leaving directory `/root/software/openssl-fips-2.0.2/fips/utl' for i in fipsld fips_standalone_sha1 ; \ do \ echo "installing $i"; \ cp $i /usr/local/ssl/fips-2.0/bin/$i.new; \ chmod 755 /usr/local/ssl/fips-2.0/bin/$i.new; \ mv -f /usr/local/ssl/fips-2.0/bin/$i.new /usr/local/ssl/fips-2.0/bin/$i; \ done installing fipsld installing fips_standalone_sha1 cp -p -f fipscanister.o fipscanister.o.sha1 \ fips_premain.c fips_premain.c.sha1 \ /usr/local/ssl/fips-2.0/lib/; \ chmod 0444 /usr/local/ssl/fips-2.0/lib/fips* make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/fips' making install in test... make[1]: Entering directory `/root/software/openssl-fips-2.0.2/test' make[1]: Nothing to be done for `install'. make[1]: Leaving directory `/root/software/openssl-fips-2.0.2/test'
zlib安装日志 cp libz.a /usr/local/lib chmod 644 /usr/local/lib/libz.a cp libz.so.1.2.8 /usr/local/lib chmod 755 /usr/local/lib/libz.so.1.2.8 cp zlib.3 /usr/local/share/man/man3 chmod 644 /usr/local/share/man/man3/zlib.3 cp zlib.pc /usr/local/lib/pkgconfig chmod 644 /usr/local/lib/pkgconfig/zlib.pc cp zlib.h zconf.h /usr/local/include chmod 644 /usr/local/include/zlib.h /usr/local/include/zconf.h 
nginx安装日志 Configuration summary + using PCRE library: ../pcre-8.21 + using OpenSSL library: ../openssl-fips-2.0.2 + md5: using OpenSSL library + sha1: using OpenSSL library + using zlib library: ../zlib-1.2.8 nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/nginx" nginx configuration prefix: "/usr/local/nginx" nginx configuration file: "/usr/local/nginx/nginx.conf" nginx pid file: "/usr/local/nginx/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" _________________________________________________________________ [root@localhost nginx-1.4.5]# make install make -f objs/Makefile install make[1]: Entering directory `/root/software/nginx-1.4.5' test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx' test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx' test ! -f '/usr/local/nginx/nginx' || mv '/usr/local/nginx/nginx' '/usr/local/nginx/nginx.old' cp objs/nginx '/usr/local/nginx/nginx' test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx' cp conf/koi-win '/usr/local/nginx' cp conf/koi-utf '/usr/local/nginx' cp conf/win-utf '/usr/local/nginx' test -f '/usr/local/nginx/mime.types' || cp conf/mime.types '/usr/local/nginx' cp conf/mime.types '/usr/local/nginx/mime.types.default' test -f '/usr/local/nginx/fastcgi_params' || cp conf/fastcgi_params '/usr/local/nginx' cp conf/fastcgi_params '/usr/local/nginx/fastcgi_params.default' test -f '/usr/local/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/usr/local/nginx' cp conf/fastcgi.conf '/usr/local/nginx/fastcgi.conf.default' test -f '/usr/local/nginx/uwsgi_params' || cp conf/uwsgi_params '/usr/local/nginx' cp conf/uwsgi_params '/usr/local/nginx/uwsgi_params.default' test -f '/usr/local/nginx/scgi_params' || cp conf/scgi_params '/usr/local/nginx' cp conf/scgi_params '/usr/local/nginx/scgi_params.default' test -f '/usr/local/nginx/nginx.conf' || cp conf/nginx.conf '/usr/local/nginx/nginx.conf' cp conf/nginx.conf '/usr/local/nginx/nginx.conf.default' test -d '/usr/local/nginx' || mkdir -p '/usr/local/nginx' test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs' test -d '/usr/local/nginx/html' || cp -R html '/usr/local/nginx' test -d '/usr/local/nginx/logs' || mkdir -p '/usr/local/nginx/logs' make[1]: Leaving directory `/root/software/nginx-1.4.5'
参考地址： http://www.cnblogs.com/dennisit/archive/2012/12/26/2834719.html http://blog.s135.com/nginx_php_v6/ http://www.nginx.cn/install (责任编辑：IT) |
