hadoop2.4.1 fs shell
时间:2014-12-30 23:05 来源:linux.it.net.cn 作者:IT
转载地址：http://hadoop.apache.org/docs/r2.4.1/hadoop-project-dist/hadoop-common/FileSystemShell.html
Overview
appendToFile
cat
chgrp
chmod
chown
copyFromLocal
copyToLocal
count
cp
du
dus
expunge
get
getfacl
getmerge
ls
lsr
mkdir
moveFromLocal
moveToLocal
mv
put
rm
rmr
setfacl
setrep
stat
tail
test
text
touchz
Overview
The File System (FS) shell includes various shell-like commands that directly interact with the Hadoop Distributed File System (HDFS) as well as other file systems that Hadoop supports, such as Local FS, HFTP FS, S3 FS, and others. The FS shell is invoked by:
bin/hadoop fs <args>
All FS shell commands take path URIs as arguments. The URI format is scheme://authority/path. For HDFS the scheme is hdfs, and for the Local FS the scheme is file. The scheme and authority are optional. If not specified, the default scheme specified in the configuration is used. An HDFS file or directory such as /parent/child can be specified as hdfs://namenodehost/parent/child or simply as /parent/child (given that your configuration is set to point to hdfs://namenodehost).
Most of the commands in FS shell behave like corresponding Unix commands. Differences are described with each of the commands. Error information is sent to stderr and the output is sent to stdout.
appendToFile
Usage: hdfs dfs -appendToFile <localsrc> ... <dst>
Append single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and appends to destination file system.
hdfs dfs -appendToFile localfile /user/hadoop/hadoopfile
hdfs dfs -appendToFile localfile1 localfile2 /user/hadoop/hadoopfile
hdfs dfs -appendToFile localfile hdfs://nn.example.com/hadoop/hadoopfile
hdfs dfs -appendToFile - hdfs://nn.example.com/hadoop/hadoopfile Reads the input from stdin.
Exit Code:
Returns 0 on success and 1 on error.
cat
Usage: hdfs dfs -cat URI [URI ...]
Copies source paths to stdout.
Example:
hdfs dfs -cat hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2
hdfs dfs -cat file:///file3 /user/hadoop/file4
Exit Code:
Returns 0 on success and -1 on error.
chgrp
Usage: hdfs dfs -chgrp [-R] GROUP URI [URI ...]
Change group association of files. The user must be the owner of files, or else a super-user. Additional information is in the Permissions Guide.
Options
The -R option will make the change recursively through the directory structure.
chmod
Usage: hdfs dfs -chmod [-R] <MODE[,MODE]... | OCTALMODE> URI [URI ...]
Change the permissions of files. With -R, make the change recursively through the directory structure. The user must be the owner of the file, or else a super-user. Additional information is in the Permissions Guide.
Options
The -R option will make the change recursively through the directory structure.
chown
Usage: hdfs dfs -chown [-R] [OWNER][:[GROUP]] URI [URI ]
Change the owner of files. The user must be a super-user. Additional information is in the Permissions Guide.
Options
The -R option will make the change recursively through the directory structure.
copyFromLocal
Usage: hdfs dfs -copyFromLocal <localsrc> URI
Similar to put command, except that the source is restricted to a local file reference.
Options:
The -f option will overwrite the destination if it already exists.
copyToLocal
Usage: hdfs dfs -copyToLocal [-ignorecrc] [-crc] URI <localdst>
Similar to get command, except that the destination is restricted to a local file reference.
count
Usage: hdfs dfs -count [-q] <paths>
Count the number of directories, files and bytes under the paths that match the specified file pattern. The output columns with -count are: DIR_COUNT, FILE_COUNT, CONTENT_SIZE FILE_NAME
The output columns with -count -q are: QUOTA, REMAINING_QUATA, SPACE_QUOTA, REMAINING_SPACE_QUOTA, DIR_COUNT, FILE_COUNT, CONTENT_SIZE, FILE_NAME
Example:
hdfs dfs -count hdfs://nn1.example.com/file1 hdfs://nn2.example.com/file2
hdfs dfs -count -q hdfs://nn1.example.com/file1
Exit Code:
Returns 0 on success and -1 on error.
cp
Usage: hdfs dfs -cp [-f] URI [URI ...] <dest>
Copy files from source to destination. This command allows multiple sources as well in which case the destination must be a directory.
Options:
The -f option will overwrite the destination if it already exists.
Example:
hdfs dfs -cp /user/hadoop/file1 /user/hadoop/file2
hdfs dfs -cp /user/hadoop/file1 /user/hadoop/file2 /user/hadoop/dir
Exit Code:
Returns 0 on success and -1 on error.
du
Usage: hdfs dfs -du [-s] [-h] URI [URI ...]
Displays sizes of files and directories contained in the given directory or the length of a file in case its just a file.
Options:
The -s option will result in an aggregate summary of file lengths being displayed, rather than the individual files.
The -h option will format file sizes in a "human-readable" fashion (e.g 64.0m instead of 67108864)
Example:
hdfs dfs -du /user/hadoop/dir1 /user/hadoop/file1 hdfs://nn.example.com/user/hadoop/dir1
Exit Code: Returns 0 on success and -1 on error.
dus
Usage: hdfs dfs -dus <args>
Displays a summary of file lengths. This is an alternate form of hdfs dfs -du -s.
expunge
Usage: hdfs dfs -expunge
Empty the Trash. Refer to the HDFS Architecture Guide for more information on the Trash feature.
get
Usage: hdfs dfs -get [-ignorecrc] [-crc] <src> <localdst>
Copy files to the local file system. Files that fail the CRC check may be copied with the -ignorecrc option. Files and CRCs may be copied using the -crc option.
Example:
hdfs dfs -get /user/hadoop/file localfile
hdfs dfs -get hdfs://nn.example.com/user/hadoop/file localfile
Exit Code:
Returns 0 on success and -1 on error.
getfacl
Usage: hdfs dfs -getfacl [-R] <path>
Displays the Access Control Lists (ACLs) of files and directories. If a directory has a default ACL, then getfacl also displays the default ACL.
Options:
-R: List the ACLs of all files and directories recursively.
path: File or directory to list.
Examples:
hdfs dfs -getfacl /file
hdfs dfs -getfacl -R /dir
Exit Code:
Returns 0 on success and non-zero on error.
getmerge
Usage: hdfs dfs -getmerge <src> <localdst> [addnl]
Takes a source directory and a destination file as input and concatenates files in src into the destination local file. Optionally addnl can be set to enable adding a newline character at the end of each file.
ls
Usage: hdfs dfs -ls <args>
For a file returns stat on the file with the following format:
permissions number_of_replicas userid groupid filesize modification_date modification_time filename
For a directory it returns list of its direct children as in Unix. A directory is listed as:
permissions userid groupid modification_date modification_time dirname
Example:
hdfs dfs -ls /user/hadoop/file1
Exit Code:
Returns 0 on success and -1 on error.
lsr
Usage: hdfs dfs -lsr <args>
Recursive version of ls. Similar to Unix ls -R.
mkdir
Usage: hdfs dfs -mkdir [-p] <paths>
Takes path uri's as argument and creates directories.
Options:
The -p option behavior is much like Unix mkdir -p, creating parent directories along the path.
Example:
hdfs dfs -mkdir /user/hadoop/dir1 /user/hadoop/dir2
hdfs dfs -mkdir hdfs://nn1.example.com/user/hadoop/dir hdfs://nn2.example.com/user/hadoop/dir
Exit Code:
Returns 0 on success and -1 on error.
moveFromLocal
Usage: dfs -moveFromLocal <localsrc> <dst>
Similar to put command, except that the source localsrc is deleted after it's copied.
moveToLocal
Usage: hdfs dfs -moveToLocal [-crc] <src> <dst>
Displays a "Not implemented yet" message.
mv
Usage: hdfs dfs -mv URI [URI ...] <dest>
Moves files from source to destination. This command allows multiple sources as well in which case the destination needs to be a directory. Moving files across file systems is not permitted.
Example:
hdfs dfs -mv /user/hadoop/file1 /user/hadoop/file2
hdfs dfs -mv hdfs://nn.example.com/file1 hdfs://nn.example.com/file2 hdfs://nn.example.com/file3 hdfs://nn.example.com/dir1
Exit Code:
Returns 0 on success and -1 on error.
put
Usage: hdfs dfs -put <localsrc> ... <dst>
Copy single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and writes to destination file system.
hdfs dfs -put localfile /user/hadoop/hadoopfile
hdfs dfs -put localfile1 localfile2 /user/hadoop/hadoopdir
hdfs dfs -put localfile hdfs://nn.example.com/hadoop/hadoopfile
hdfs dfs -put - hdfs://nn.example.com/hadoop/hadoopfile Reads the input from stdin.
Exit Code:
Returns 0 on success and -1 on error.
rm
Usage: hdfs dfs -rm [-skipTrash] URI [URI ...]
Delete files specified as args. Only deletes non empty directory and files. If the -skipTrash option is specified, the trash, if enabled, will be bypassed and the specified file(s) deleted immediately. This can be useful when it is necessary to delete files from an over-quota directory. Refer to rmr for recursive deletes.
Example:
hdfs dfs -rm hdfs://nn.example.com/file /user/hadoop/emptydir
Exit Code:
Returns 0 on success and -1 on error.
rmr
Usage: hdfs dfs -rmr [-skipTrash] URI [URI ...]
Recursive version of delete. If the -skipTrash option is specified, the trash, if enabled, will be bypassed and the specified file(s) deleted immediately. This can be useful when it is necessary to delete files from an over-quota directory.
Example:
hdfs dfs -rmr /user/hadoop/dir
hdfs dfs -rmr hdfs://nn.example.com/user/hadoop/dir
Exit Code:
Returns 0 on success and -1 on error.
setfacl
Usage: hdfs dfs -setfacl [-R] [-b|-k -m|-x <acl_spec> <path>]|[--set <acl_spec> <path>]
Sets Access Control Lists (ACLs) of files and directories.
Options:
-b: Remove all but the base ACL entries. The entries for user, group and others are retained for compatibility with permission bits.
-k: Remove the default ACL.
-R: Apply operations to all files and directories recursively.
-m: Modify ACL. New entries are added to the ACL, and existing entries are retained.
-x: Remove specified ACL entries. Other ACL entries are retained.
--set: Fully replace the ACL, discarding all existing entries. The acl_spec must include entries for user, group, and others for compatibility with permission bits.
acl_spec: Comma separated list of ACL entries.
path: File or directory to modify.
Examples:
hdfs dfs -setfacl -m user:hadoop:rw- /file
hdfs dfs -setfacl -x user:hadoop /file
hdfs dfs -setfacl -b /file
hdfs dfs -setfacl -k /dir
hdfs dfs -setfacl --set user::rw-,user:hadoop:rw-,group::r--,other::r-- /file
hdfs dfs -setfacl -R -m user:hadoop:r-x /dir
hdfs dfs -setfacl -m default:user:hadoop:r-x /dir
Exit Code:
Returns 0 on success and non-zero on error.
setrep
Usage: hdfs dfs -setrep [-R] [-w] <numReplicas> <path>
Changes the replication factor of a file. If path is a directory then the command recursively changes the replication factor of all files under the directory tree rooted at path.
Options:
The -w flag requests that the command wait for the replication to complete. This can potentially take a very long time.
The -R flag is accepted for backwards compatibility. It has no effect.
Example:
hdfs dfs -setrep -w 3 /user/hadoop/dir1
Exit Code:
Returns 0 on success and -1 on error.
stat
Usage: hdfs dfs -stat URI [URI ...]
Returns the stat information on the path.
Example:
hdfs dfs -stat path
Exit Code: Returns 0 on success and -1 on error.
tail
Usage: hdfs dfs -tail [-f] URI
Displays last kilobyte of the file to stdout.
Options:
The -f option will output appended data as the file grows, as in Unix.
Example:
hdfs dfs -tail pathname
Exit Code: Returns 0 on success and -1 on error.
test
Usage: hdfs dfs -test -[ezd] URI
Options:
The -e option will check to see if the file exists, returning 0 if true.
The -z option will check to see if the file is zero length, returning 0 if true.
The -d option will check to see if the path is directory, returning 0 if true.
Example:
hdfs dfs -test -e filename
text
Usage: hdfs dfs -text <src>
Takes a source file and outputs the file in text format. The allowed formats are zip and TextRecordInputStream.
touchz
Usage: hdfs dfs -touchz URI [URI ...]
Create a file of zero length.
Example:
hadoop -touchz pathname
Exit Code: Returns 0 on success and -1 on error.
(责任编辑：IT)
转载地址：http://hadoop.apache.org/docs/r2.4.1/hadoop-project-dist/hadoop-common/FileSystemShell.html
Overview
The File System (FS) shell includes various shell-like commands that directly interact with the Hadoop Distributed File System (HDFS) as well as other file systems that Hadoop supports, such as Local FS, HFTP FS, S3 FS, and others. The FS shell is invoked by: bin/hadoop fs <args> All FS shell commands take path URIs as arguments. The URI format is scheme://authority/path. For HDFS the scheme is hdfs, and for the Local FS the scheme is file. The scheme and authority are optional. If not specified, the default scheme specified in the configuration is used. An HDFS file or directory such as /parent/child can be specified as hdfs://namenodehost/parent/child or simply as /parent/child (given that your configuration is set to point to hdfs://namenodehost). Most of the commands in FS shell behave like corresponding Unix commands. Differences are described with each of the commands. Error information is sent to stderr and the output is sent to stdout.
Usage: hdfs dfs -appendToFile <localsrc> ... <dst>
Append single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and appends to destination file system. Exit Code: Returns 0 on success and 1 on error.
Usage: hdfs dfs -cat URI [URI ...] Copies source paths to stdout.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -chgrp [-R] GROUP URI [URI ...] Change group association of files. The user must be the owner of files, or else a super-user. Additional information is in the Permissions Guide.
Options
Usage: hdfs dfs -chmod [-R] <MODE[,MODE]... | OCTALMODE> URI [URI ...] Change the permissions of files. With -R, make the change recursively through the directory structure. The user must be the owner of the file, or else a super-user. Additional information is in the Permissions Guide.
Options
Usage: hdfs dfs -chown [-R] [OWNER][:[GROUP]] URI [URI ] Change the owner of files. The user must be a super-user. Additional information is in the Permissions Guide.
Options
Usage: hdfs dfs -copyFromLocal <localsrc> URI Similar to put command, except that the source is restricted to a local file reference.
Options:
Usage: hdfs dfs -copyToLocal [-ignorecrc] [-crc] URI <localdst> Similar to get command, except that the destination is restricted to a local file reference.
Usage: hdfs dfs -count [-q] <paths> Count the number of directories, files and bytes under the paths that match the specified file pattern. The output columns with -count are: DIR_COUNT, FILE_COUNT, CONTENT_SIZE FILE_NAME The output columns with -count -q are: QUOTA, REMAINING_QUATA, SPACE_QUOTA, REMAINING_SPACE_QUOTA, DIR_COUNT, FILE_COUNT, CONTENT_SIZE, FILE_NAME
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -cp [-f] URI [URI ...] <dest> Copy files from source to destination. This command allows multiple sources as well in which case the destination must be a directory.
Options:
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -du [-s] [-h] URI [URI ...] Displays sizes of files and directories contained in the given directory or the length of a file in case its just a file.
Options:
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -dus <args> Displays a summary of file lengths. This is an alternate form of hdfs dfs -du -s.
Usage: hdfs dfs -expunge Empty the Trash. Refer to the HDFS Architecture Guide for more information on the Trash feature.
Usage: hdfs dfs -get [-ignorecrc] [-crc] <src> <localdst> Copy files to the local file system. Files that fail the CRC check may be copied with the -ignorecrc option. Files and CRCs may be copied using the -crc option.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -getfacl [-R] <path> Displays the Access Control Lists (ACLs) of files and directories. If a directory has a default ACL, then getfacl also displays the default ACL.
Options:
Examples: Exit Code: Returns 0 on success and non-zero on error.
Usage: hdfs dfs -getmerge <src> <localdst> [addnl] Takes a source directory and a destination file as input and concatenates files in src into the destination local file. Optionally addnl can be set to enable adding a newline character at the end of each file.
Usage: hdfs dfs -ls <args> For a file returns stat on the file with the following format: permissions number_of_replicas userid groupid filesize modification_date modification_time filename For a directory it returns list of its direct children as in Unix. A directory is listed as: permissions userid groupid modification_date modification_time dirname
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -lsr <args> Recursive version of ls. Similar to Unix ls -R.
Usage: hdfs dfs -mkdir [-p] <paths> Takes path uri's as argument and creates directories.
Options:
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: dfs -moveFromLocal <localsrc> <dst> Similar to put command, except that the source localsrc is deleted after it's copied.
Usage: hdfs dfs -moveToLocal [-crc] <src> <dst> Displays a "Not implemented yet" message.
Usage: hdfs dfs -mv URI [URI ...] <dest> Moves files from source to destination. This command allows multiple sources as well in which case the destination needs to be a directory. Moving files across file systems is not permitted.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -put <localsrc> ... <dst>
Copy single src, or multiple srcs from local file system to the destination file system. Also reads input from stdin and writes to destination file system. Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -rm [-skipTrash] URI [URI ...] Delete files specified as args. Only deletes non empty directory and files. If the -skipTrash option is specified, the trash, if enabled, will be bypassed and the specified file(s) deleted immediately. This can be useful when it is necessary to delete files from an over-quota directory. Refer to rmr for recursive deletes.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -rmr [-skipTrash] URI [URI ...] Recursive version of delete. If the -skipTrash option is specified, the trash, if enabled, will be bypassed and the specified file(s) deleted immediately. This can be useful when it is necessary to delete files from an over-quota directory.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -setfacl [-R] [-b|-k -m|-x <acl_spec> <path>]|[--set <acl_spec> <path>] Sets Access Control Lists (ACLs) of files and directories.
Options:
Examples: Exit Code: Returns 0 on success and non-zero on error.
Usage: hdfs dfs -setrep [-R] [-w] <numReplicas> <path> Changes the replication factor of a file. If path is a directory then the command recursively changes the replication factor of all files under the directory tree rooted at path.
Options:
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -stat URI [URI ...] Returns the stat information on the path.
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -tail [-f] URI Displays last kilobyte of the file to stdout.
Options:
Example: Exit Code: Returns 0 on success and -1 on error.
Usage: hdfs dfs -test -[ezd] URI
Options:
Example:
Usage: hdfs dfs -text <src> Takes a source file and outputs the file in text format. The allowed formats are zip and TextRecordInputStream.
Usage: hdfs dfs -touchz URI [URI ...] Create a file of zero length.
Example: Exit Code: Returns 0 on success and -1 on error. (责任编辑：IT) |