centos查看电脑主机温度命令

时间:2015-01-26 23:22 来源:linux.it.net.cn 作者:IT

在centos系统里可以通过lm_sensors来查看CPU的温度(当然你的硬件首先要支持）,要使用这个功能要有内核相关模块(比如I2C)的支持，下面说一下操作方法：
先看一下你的机器上是否安装了lm_sensors,
$ rpm -q lm_sensors

如果没有安装就先安装一下
$ sudo yum install -y lm_sensors

检测传感器：
$ sudo sh -c "yes|sensors-detect"

如果以上步骤没有问题，执行下面的命令就可以查看CPU的温度了：
$ sensors

Adapter: ISA adapter
in0:       +1.07 V  (min =  +0.00 V, max =  +4.08 V)
in1:       +1.82 V (min =  +0.00 V, max =  +4.08 V)
in2:       +3.36 V  (min =  +0.00 V, max =  +4.08 V)
in3:       +2.94 V  (min =  +0.00 V, max =  +4.08 V)
in4:       +0.29 V  (min =  +0.00 V, max =  +2.10 V)
in5:       +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:       +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in7:       +3.07 V  (min =  +0.00 V, max =  +4.08 V)
in8:       +3.09 V
fan1:     2463 RPM  (min =    0 RPM)
fan2:        0 RPM  (min =    0 RPM)
temp1:       -55°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor
temp2:        -2°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor
temp3:       +21°C  (low  =  +127°C, high =  +127°C)   sensor = diode
vid:      +2.050 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +44°C  (high =  +100°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +27°C  (high =  +100°C)
it8718-isa-0290
Adapter: ISA adapter
in0:       +1.07 V  (min =  +0.00 V, max =  +4.08 V)
in1:       +1.82 V  (min =  +0.00 V, max =  +4.08 V)
in2:       +3.36 V  (min =  +0.00 V, max =  +4.08 V)
in3:       +2.94 V  (min =  +0.00 V, max =  +4.08 V)
in4:       +0.29 V  (min =  +0.00 V, max =  +2.10 V)
in5:       +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:       +4.08 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in7:       +3.07 V  (min =  +0.00 V, max =  +4.08 V)
in8:       +3.09 V
fan1:     2463 RPM  (min =    0 RPM)
fan2:        0 RPM  (min =    0 RPM)
temp1:       -55°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor
temp2:        -2°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor
temp3:       +21°C  (low  =  +127°C, high =  +127°C)   sensor = diode
vid:      +2.050 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +44°C  (high =  +100°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +27°C  (high =  +100°C) (责任编辑：IT)