CentOS磁盘健康状况查看
时间:2015-08-14 19:20 来源:www.it.net.cn 作者:IT网
windows下有HDTune可以查看磁盘的状态，防止磁盘挂掉才会自己知道，CentOS下有SMART (Self-Monitoring, Analysis and Reporting Technology System) 同样对磁盘做状态检测
http://www.smartmontools.org/
下面以dell R720服务器举例，/dev/sda是1T的scsi接口普通硬盘，/dev/sdd 是三块盘做的raid5
# df -h #查看磁盘的名字
# dmesg |grep sdd #查看开机信息里面的磁盘info
sd 0:2:0:0: [sdd] Attached SCSI disk
# hdparm -I /dev/sda #查看磁盘硬件信息、开启的功能等,信息特别详细
# yum install smartmontools //安装SMART
# smartctl -H /dev/sdd //磁盘健康状况查看
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.10.56-11.el6.centos.alt.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
SMART Health Status: OK
# smartctl -a /dev/sdd
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.10.56-11.el6.centos.alt.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen,
http://smartmontools.sourceforge.net
Vendor: DELL
Product: PERC H310
Revision: 2.12
User Capacity: 598,879,502,336 bytes [598 GB]
Logical block size: 512 bytes
Logical Unit id:
Serial number:
Device type: disk
Local Time is: Wed Jan 14 15:37:39 2015 CST
Device does not support SMART
Error Counter logging not supported
Device does not support Self Test logging
# smartctl -h
Usage: smartctl [options] device
============================================ SHOW INFORMATION OPTIONS =====
-h, --help, --usage
Display this help and exit
-V, --version, --copyright, --license
Print license, copyright, and version information and exit
-i, --info
Show identity information for device
-g NAME, --get=NAME
Get device setting: all, aam, apm, lookahead, security, wcache
-a, --all
Show all SMART information for device
-x, --xall
Show all information for device
--scan
Scan for devices
--scan-open
Scan for devices and try to open each device
================================== SMARTCTL RUN-TIME BEHAVIOR OPTIONS =====
-q TYPE, --quietmode=TYPE (ATA)
Set smartctl quiet mode to one of: errorsonly, silent, noserial
-d TYPE, --device=TYPE
Specify device type to one of: ata, scsi, sat[,auto][,N][+TYPE],
usbcypress[,X], usbjmicron[,x][,N], usbsunplus, marvell, areca,N/E,
3ware,N, hpt,L/M/N, megaraid,N, cciss,N, auto, test
-T TYPE, --tolerance=TYPE (ATA)
Tolerance: normal, conservative, permissive, verypermissive
-b TYPE, --badsum=TYPE (ATA)
Set action on bad checksum to one of: warn, exit, ignore
-r TYPE, --report=TYPE
Report transactions (see man page)
-n MODE, --nocheck=MODE (ATA)
No check if: never, sleep, standby, idle (see man page)
============================== DEVICE FEATURE ENABLE/DISABLE COMMANDS =====
-s VALUE, --smart=VALUE
Enable/disable SMART on device (on/off)
-o VALUE, --offlineauto=VALUE (ATA)
Enable/disable automatic offline testing on device (on/off)
-S VALUE, --saveauto=VALUE (ATA)
Enable/disable Attribute autosave on device (on/off)
-s NAME[,VALUE], --set=NAME[,VALUE]
Enable/disable/change device setting: aam,[N|off], apm,[N|off],
lookahead,[on|off], security-freeze, standby,[N|off|now],
wcache,[on|off]
======================================= READ AND DISPLAY DATA OPTIONS =====
-H, --health
Show device SMART health status
-c, --capabilities (ATA)
Show device SMART capabilities
-A, --attributes
Show device SMART vendor-specific Attributes and values
-f FORMAT, --format=FORMAT (ATA)
Set output format for attributes: old, brief, hex[,id|val]
-l TYPE, --log=TYPE
Show device log. TYPE: error, selftest, selective, directory[,g|s],
xerror[,N][,error], xselftest[,N][,selftest],
background, sasphy[,reset], sataphy[,reset],
scttemp[sts,hist], scttempint,N[,p],
scterc[,N,M], devstat[,N], ssd,
gplog,N[,RANGE], smartlog,N[,RANGE]
-v N,OPTION , --vendorattribute=N,OPTION (ATA)
Set display OPTION for vendor Attribute N (see man page)
-F TYPE, --firmwarebug=TYPE (ATA)
Use firmware bug workaround: none, samsung, samsung2,
samsung3, swapid
-P TYPE, --presets=TYPE (ATA)
Drive-specific presets: use, ignore, show, showall
-B [+]FILE, --drivedb=[+]FILE (ATA)
Read and replace [add] drive database from FILE
[default is +/etc/smart_drivedb.h
and then /usr/share/smartmontools/drivedb.h]
============================================ DEVICE SELF-TEST OPTIONS =====
-t TEST, --test=TEST
Run test. TEST: offline, short, long, conveyance, force, vendor,N,
select,M-N, pending,N, afterselect,[on|off]
-C, --captive
Do test in captive mode (along with -t)
-X, --abort
Abort any non-captive test on device
=================================================== SMARTCTL EXAMPLES =====
smartctl --all /dev/hda (Prints all SMART information)
smartctl --smart=on --offlineauto=on --saveauto=on /dev/hda
(Enables SMART on first disk)
smartctl --test=long /dev/hda (Executes extended disk self-test)
smartctl --attributes --log=selftest --quietmode=errorsonly /dev/hda
(Prints Self-Test & Attribute errors)
smartctl --all --device=3ware,2 /dev/sda
smartctl --all --device=3ware,2 /dev/twe0
smartctl --all --device=3ware,2 /dev/twa0
smartctl --all --device=3ware,2 /dev/twl0
(Prints all SMART info for 3rd ATA disk on 3ware RAID controller)
smartctl --all --device=hpt,1/1/3 /dev/sda
(Prints all SMART info for the SATA disk attached to the 3rd PMPort
of the 1st channel on the 1st HighPoint RAID controller)
smartctl --all --device=areca,3/1 /dev/sg2
(Prints all SMART info for 3rd ATA disk of the 1st enclosure
on Areca RAID controller)
(责任编辑：IT)
windows下有HDTune可以查看磁盘的状态，防止磁盘挂掉才会自己知道，CentOS下有SMART (Self-Monitoring, Analysis and Reporting Technology System) 同样对磁盘做状态检测
http://www.smartmontools.org/ 下面以dell R720服务器举例，/dev/sda是1T的scsi接口普通硬盘，/dev/sdd 是三块盘做的raid5 # df -h #查看磁盘的名字
# dmesg |grep sdd #查看开机信息里面的磁盘info
sd 0:2:0:0: [sdd] Attached SCSI disk
# hdparm -I /dev/sda #查看磁盘硬件信息、开启的功能等,信息特别详细
(责任编辑：IT) |
