centos7.2 安装smokeping

时间:2016-06-18 16:11 来源:blog.csdn.net 作者:ggvylf 的BLOG

第1章基本概念

第2章安装

2.0 时间同步

yum -y install ntpdate

ntpdate times.aliyun.com

2.1 安装依赖包

yum groupinstall "Compatibility libraries" "Base" "Development tools" -y

yum -y installcpan perl perl-FCGI perl-CGI perl-Digest-HMAC perl-Net-Telnet perl-Net-OpenSSH perl-Net-SNMPperl-LDAP perl-Net-DNS perl-IO-Pty-Easy perl-Test-Simple perl-Sys-Syslog perl-libwww-perlperl-IO-Socket-SSL perl-Socket6 perl-CGI-SpeedyCGI perl-FCGI perl-Time-HiResperl-ExtUtils-MakeMaker rrdtool rrdtool-perl curl fping httpd httpd-devel gccmake wget libxml2-devel libpng-devel glib pango pango-devel freetypefreetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel mod_fcgidscreen

2.2 安装echoping

tar xvfechoping-6.0.2.tar.gz

cd echoping-6.0.2

./configure--prefix=/usr/local/echoping

make && makeinstall

2.3 安装smokeping

cd /usr/local/src

xf smokeping-2.6.11.tar.gz

cd smokeping-2.6.11

#exportPERL5LIB=/usr/local/smokeping/thirdparty/lib/perl5/

./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty

./configure --prefix=/usr/local/smokeping

gmake install

如果./configure过程中提示找不到某些perl扩展，如下所示

checking checking for perl module'Config::Grammar'... Can't locate Config/Grammar.pm in @INC (@INC contains:/usr/local/smokeping/thirdparty/lib/perl5 /usr/local/lib64/perl5 /usr/local/share/perl5/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5/usr/share/perl5 .) at -e line 1.

BEGIN failed--compilation aborted at -e line 1.

请使用以下命令安装对应模块：

perl -MCPAN -e 'install Config::Grammar'

注意：有时候需要重复安装几次才能装上模块。

注意要选择国内的的模块源，不然速度很慢。

2.4 创建相关目录和日志文件

cd /usr/local/smokeping

mkdir cache data var

touch /var/log/smokeping.log

chown apache.apache cache/ data/ var/ /var/log

因为这里的web服务使用的是httpd，所以相关文件的属主属组均为apache

2.5 创建相关配置文件

#fcgi文件

cp /usr/local/smokeping/htdocs/smokeping.fcgi.dist /usr/local/smokeping/htdocs/smokeping.fcgi

#主配置文件

cp /usr/local/smokeping/etc/config.dist/usr/local/smokeping/etc/config

2.6 修改配置文件

#指定cgi的url地址为本机

sed -i ‘s#cgiurl = http://some.url/smokeping.cgi#cgiurl = http://10.0.56.12/smokeping.cgi#g’/usr/local/smokeping/etc/config

#指定检测的时间为60秒

sed -i ‘s#step = 300#step = 60#g’/usr/local/smokeping/etc/config

#指定ping的次数为60

sed -i ‘s#pings =20#pings =60#g’/usr/local/smokeping/etc/config

将step和pings都设置为60表示每60秒ping60次。

2.7 修改字符集和字体支持中文

vim /usr/local/smokeping/etc/config

***Presentation ***

charset= utf-8

yum -y install wqy-zenhei-fonts

vim/usr/local/smokeping/lib/Smokeping/Graphs.pm

my$val = 0;

formy $host (@hosts){

my ($graphret,$xs,$ys) = RRDs::graph

("dummy",

'--start', $tasks[0][1],

'--end', $tasks[0][2],

'--font TITLE:20"WenQuanYiZen Hei Mono"',

"DEF:maxping=$cfg->{General}{datadir}${host}.rrd:median:AVERAGE",

'PRINT:maxping:MAX:%le' );

my $ERROR = RRDs::error();

2.8 修改apache配置文件增加登录验证

htpasswd -c /usr/local/smokeping/htdocs/htpasswd smokeping

chmod 600 /usr/local/smokeping/etc/smokeping_secrets.dist

2.9 修改httpd.conf增加smokeping的web界面

在httpd.conf末尾添加如下内容

vim /etc/httpd/conf/httpd.conf

#########changed by ggvylf 2016/06/13##############

Alias /cache"/usr/local/smokeping/cache/"

Alias /cropper"/usr/local/smokeping/htdocs/cropper/"

Alias /smokeping "/usr/local/smokeping/htdocs/smokeping.fcgi"

AllowOverride None

Options All

AddHandler cgi-script .fcgi .cgi

AllowOverride AuthConfig

Order allow,deny

Allow from all

AuthName "Smokeping"

AuthType Basic

AuthUserFile /usr/local/smokeping/htdocs/htpasswd

Require valid-user

DirectoryIndex smokeping.fcgi

</Directory>

2.10 添加监控对象

vim /usr/local/smokeping/etc/config

*** Targets ***

++ Localhost

menu = Localhost

title = Localhost

alerts = someloss

#slaves = boomer slave2

host = 10.0.56.12

2.11 添加监控节点

注意：每次修改配置文件后需要重启smokeping进程

/usr/local/smokeping/bin/smokeping --restart

或

/usr/local/smokeping/bin/smokeping --reload

或

pkill smokeping

/usr/local/smokeping/bin/smokeping

监控节点样例如下，注意+是第一层，++是第二层，+++ 是第三层：

vim /usr/local/smokeping/etc/config

+ Other

menu = 三大网络监控

title = 监控统计

++ dianxin

menu = 电信网络监控

title = 电信网络监控列表

host = /Other/dianxin/dianxin-bj/Other/dianxin/dianxin-hlj /Other/dianxin/dianxin-tj /Other/dianxin/dianxin-sc /Other/dianxin/dianxin-sh/Other/dianxin/dianxin-gz

+++ dianxin-bj

menu = 北京电信

title = 北京电信

alerts = someloss

host = 202.96.199.133

+++ dianxin-hlj

menu = 黑龙江电信

title = 黑龙江电信

alerts = someloss

host = 219.147.198.242

+++ dianxin-tj

menu = 天津电信

title = 天津电信

alerts = someloss

host = 219.150.32.132

+++ dianxin-sc

menu = 四川电信

title = 四川电信

alerts = someloss

host = 61.139.2.69

+++ dianxin-sh

menu = 上海电信

title = 上海电信

alerts = someloss

host = 116.228.111.118

+++ dianxin-gz

menu = 广东电信

title = 广东电信

alerts = someloss

host = 113.111.211.22

++ liantong

menu = 联通网络监控

title = 联通网络监控列表

host = /Other/liantong/liantong-bj/Other/liantong/liantong-hlj /Other/liantong/liantong-tj /Other/liantong/liantong-sc/Other/liantong/liantong-sh /Other/liantong/liantong-gz

+++ liantong-bj

menu = 北京联通

title = 北京联通

alerts = someloss

host = 61.135.169.121

+++ liantong-hlj

menu = 黑龙江联通

title = 黑龙江联通

alerts = someloss

host = 202.97.224.69

+++ liantong-tj

menu = 天津联通

title = 天津联通

alerts = someloss

host = 202.99.96.68

+++ liantong-sc

menu = 四川联通

title = 四川联通

alerts = someloss

host = 119.6.6.6

+++ liantong-sh

menu = 上海联通

title = 上海联通

alerts = someloss

host = 210.22.84.3

+++ liantong-gz

menu = 广东联通

title = 广东联通

alerts = someloss

host = 221.5.88.88

++ yidong

menu = 移动网络监控

title = 移动网络监控列表

host = /Other/yidong/yidong-bj/Other/yidong/yidong-hlj /Other/yidong/yidong-tj /Other/yidong/yidong-sc /Other/yidong/yidong-sh/Other/yidong/yidong-gz

+++ yidong-bj

menu = 北京移动

title = 北京移动

alerts = someloss

host = 221.130.33.52

+++ yidong-hlj

menu = 黑龙江移动

title = 黑龙江移动

alerts = someloss

host = 211.137.241.35

+++ yidong-tj

menu = 天津移动

title = 天津移动

alerts = someloss

host = 211.137.160.5

+++ yidong-sc

menu = 四川移动

title = 四川移动

alerts = someloss

host = 218.201.4.3

+++ yidong-sh

menu = 上海移动

title = 上海移动

alerts = someloss

host = 117.131.19.23

+++ yidong-gz

menu = 广东移动

title = 广东移动

alerts = someloss

host = 211.136.192.6

smokeping会根据配置文件中配置监控节点的内容，在/usr/local/smokeping/data目录下生成对应的moniter文件夹，其下包含website子文件夹。

[root@linux-node2 smokeping]# tree/usr/local/smokeping/data/

/usr/local/smokeping/data/

├── Other

│ ├── dianxin

│ │ ├── dianxin-bj.rrd

│ │ ├── dianxin-gd.rrd

│ │ ├── dianxin-gs.rrd

│ │ ├── dianxin-gz.rrd

│ │ ├── dianxin-hlj.rrd

│ │ ├── dianxin-sc.rrd

│ │ ├── dianxin-sh.rrd

│ │ └── dianxin-tj.rrd

│ ├── liantong

│ │ ├── liantong-bj.rrd

│ │ ├── liantong-gz.rrd

│ │ ├── liantong-hlj.rrd

│ │ ├── liantong-sc.rrd

│ │ ├── liantong-sh.rrd

│ │ └── liantong-tj.rrd

│ └── yidong

│ ├── yidong-bj.rrd

│ ├── yidong-gz.rrd

│ ├── yidong-hlj.rrd

│ ├── yidong-sc.rrd

│ ├── yidong-sh.rrd

│ └── yidong-tj.rrd

├── __sortercache

│ └── data.FPing.storable

└── Test

├──James~boomer.rrd

├──James.rrd

├──James~slave2.rrd

└──Localhost.rrd

2.12 启动服务并测试

systemctl start httpd

/usr/local/smokeping/bin/smokeping

在浏览器中访问

http://10.0.56.12/smokeping

用户名和密码为htpasswd命令中设定用户名和密码

出现以下界面表示成功。

可以看到添加的节点的相关信息。

可以看到添加的监控点的ping状态

附录：

更改CPAN源的方法：

[root@linux-node2 smokeping-2.6.11]# cpan

Sorry, we have to rerun the configuration dialogfor CPAN.pm due to

some missing parameters. Configuration will bewritten to

<</root/.cpan/CPAN/MyConfig.pm>>

CPAN.pm requires configuration, but most of it canbe done automatically.

If you answer 'no' below, you will enter aninteractive dialog for each

configuration option instead.

Would you like to configure as much as possibleautomatically? [yes] yes

<install_help>

Warning: You do not have write permission for Perllibrary directories.

To install modules, you need to configure a localPerl library directory or

escalate your privileges. CPAN can help you by bootstrapping thelocal::lib

module or by configuring itself to use 'sudo' (ifavailable). You may also

resolve this problem manually if you need tocustomize your setup.

What approach do you want? (Choose 'local::lib', 'sudo' or 'manual')

[local::lib]

Autoconfigured everything but 'urllist'.

Now you need to choose your CPAN mirror sites. You can let me

pick mirrors for you, you can select them from alist or you

can enter them by hand.

Would you like me to automatically choose someCPAN mirror

sites for you? (This means connecting to theInternet) [yes] no

Would you like to pick from the CPAN mirror list?[yes] yes

Found a cached mirror list as of Mon Jun 1307:01:48 2016

If you'd like to just use the cached copy, answer'yes', below.

If you'd like an updated copy of the mirror list,answer 'no' and

I'll get a fresh one from the Internet.

Shall I use the cached mirror list? [yes] yes

First, pick a nearby continent and country bytyping in the number(s)

in front of the item(s) you want to select. Youcan pick several of

each, separated by spaces. Then, you will bepresented with a list of

URLs of CPAN mirrors in the countries youselected, along with

previously selected URLs. Select some of thoseURLs, or just keep the

old list. Finally, you will be prompted for anyextra URLs -- file:,

ftp:, or http: -- that host a CPAN mirror.

You should select more than one (just in case thefirst isn't available).

(1) Africa

(2) Asia

(3) Europe

(4) North America

(5) Oceania

(6) South America

Select your continent (or several nearbycontinents) [] 2

(1) Bangladesh

(2) China

(3) India

(4) Indonesia

(5) Iran

(6) Israel

(7) Japan

(8) Kazakhstan

(9) Philippines

(10) Qatar

(11) Republic of Korea

(12) Singapore

(13) Taiwan

(14) Turkey

(15) Viet Nam

Select your country (or several nearby countries)[] 2

(1) ftp://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/

(2) ftp://mirrors.ustc.edu.cn/CPAN/

(3) ftp://mirrors.xmu.edu.cn/CPAN/

(4) http://cpan.communilink.net/

(5) http://ftp.cuhk.edu.hk/pub/packages/perl/CPAN/

(6) http://mirror.lzu.edu.cn/CPAN/

(7) http://mirrors.163.com/cpan/

(8) http://mirrors.hust.edu.cn/CPAN/

(9) http://mirrors.neusoft.edu.cn/cpan/

(10) http://mirrors.sohu.com/CPAN/

(11) http://mirrors.ustc.edu.cn/CPAN/

(12) http://mirrors.xmu.edu.cn/CPAN/

(13) http://mirrors.zju.edu.cn/CPAN/

Select as many URLs as you like (by number),

put them on one line, separated by blanks,hyphenated ranges allowed

e.g. '1 45' or '7 1-4 8' [] 7

Now you can enter your own CPAN URLs by hand. Alocal CPAN mirror can be

listed using a 'file:' URL like'file:///path/to/cpan/'

Enter another URL or ENTER to quit: []

New urllist

http://mirrors.163.com/cpan/

Autoconfiguration complete.

Attempting to bootstrap local::lib...

Writing /root/.cpan/CPAN/MyConfig.pm forbootstrap...

commit: wrote '/root/.cpan/CPAN/MyConfig.pm'

Fetching with LWP:

http://mirrors.163.com/cpan/authors/01mailrc.txt.gz

Reading'/root/.cpan/sources/authors/01mailrc.txt.gz'

............................................................................DONE

Fetching with LWP:

http://mirrors.163.com/cpan/modules/02packages.details.txt.gz

Reading'/root/.cpan/sources/modules/02packages.details.txt.gz'

Databasewas generated on Thu, 09 Jun 2016 22:53:42 GMT

.............

NewCPAN.pm version (v2.10) available.

[Currentlyrunning version is v1.9800]

You mightwant to try

install CPAN

reloadcpan

to bothupgrade CPAN.pm and run the new version without leaving

thecurrent session.

...............................................................DONE

Fetching with LWP:

http://mirrors.163.com/cpan/modules/03modlist.data.gz

Reading'/root/.cpan/sources/modules/03modlist.data.gz'

DONE

Writing /root/.cpan/Metadata

Running make forH/HA/HAARG/local-lib-2.000019.tar.gz

Fetching with LWP:

http://mirrors.163.com/cpan/authors/id/H/HA/HAARG/local-lib-2.000019.tar.gz

Fetching with LWP:

http://mirrors.163.com/cpan/authors/id/H/HA/HAARG/CHECKSUMS

Checksum for/root/.cpan/sources/authors/id/H/HA/HAARG/local-lib-2.000019.tar.gz ok

CPAN.pm:Building H/HA/HAARG/local-lib-2.000019.tar.gz

Checking if your kit is complete...

Looks good

Warning: prerequisite Test::More 0 not found.

Generating a Unix-style Makefile

Writing Makefile for local::lib

Writing MYMETA.yml and MYMETA.json

---- Unsatisfied dependencies detected during ----

---- HAARG/local-lib-2.000019.tar.gz ----

Test::More [build_requires]

Running make test

Delayeduntil after prerequisites

Running make install

Delayeduntil after prerequisites

Tried to deactivate inactive local::lib'/root/perl5'

local::lib is installed. You must now add thefollowing environment variables

to your shell configuration files (or registry, ifyou are on Windows) and

then restart your command line shell and CPANbefore installing modules:

Use of uninitialized value $deactivating innumeric eq (==) at /usr/share/perl5/vendor_perl/local/lib.pm line 381.

Use of uninitialized value $deactivating innumeric eq (==) at /usr/share/perl5/vendor_perl/local/lib.pm line 383.

Use of uninitialized value$options{"interpolate"} in numeric eq (==) at /usr/share/perl5/vendor_perl/local/lib.pmline 424.

Use of uninitialized value$options{"interpolate"} in numeric eq (==) at/usr/share/perl5/vendor_perl/local/lib.pm line 424.

Use of uninitialized value$options{"interpolate"} in numeric eq (==) at /usr/share/perl5/vendor_perl/local/lib.pmline 424.

exportPERL_LOCAL_LIB_ROOT="$PERL_LOCAL_LIB_ROOT:/root/perl5";

export PERL_MB_OPT="--install_base/root/perl5";

exportPERL_MM_OPT="INSTALL_BASE=/root/perl5";

exportPERL5LIB="/root/perl5/lib/perl5:$PERL5LIB";

export PATH="/root/perl5/bin:$PATH";

Would you like me to append that to /root/.bashrcnow? [yes]

commit: wrote '/root/.cpan/CPAN/MyConfig.pm'

You can re-run configuration any time with 'o confinit' in the CPAN shell

Terminal does not support AddHistory.

cpan shell -- CPAN exploration and modulesinstallation (v1.9800)

Enter 'h' for help.

cpan[1]> exit

Terminal does not support GetHistory.

Lockfile removed.

*** Remember to restart your shell before runningcpan again ***

或

# perl -MCPAN -e shell

cpan> o conf urllist unshift http://mirrors.aliyun.com/CPAN/

cpan> o conf commit

(责任编辑：IT)

centos7.2 安装smokeping

时间:2016-06-18 16:11 来源:blog.csdn.net 作者:ggvylf 的BLOG

第2章 安装

2.0 时间同步

2.1 安装依赖包

2.2 安装echoping

2.3 安装smokeping

2.4 创建相关目录和日志文件

2.5 创建相关配置文件

2.6 修改配置文件

2.7 修改字符集和字体支持中文

2.8 修改apache配置文件增加登录验证

2.9 修改httpd.conf增加smokeping的web界面

2.10 添加监控对象

2.11 添加监控节点

2.12 启动服务并测试

附录：

第2章安装