debian7配置iptables
时间:2016-07-25 15:51 来源:linux.it.net.cn 作者:IT
debian7配置iptables
vim /etc/iptables.rule
文件内容如下
*filter
# Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn’t use lo0
-A INPUT -i lo -j ACCEPT
-A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT
# Accepts all established inbound connections
-A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT
# Allows all outbound traffic
# You could modify this to only allow certain traffic
-A OUTPUT -j ACCEPT
# Allows HTTP and HTTPS connections from anywhere (the normal ports for websites)
-A INPUT -p tcp –dport 80 -j ACCEPT
-A INPUT -p tcp –dport 443 -j ACCEPT
# Allows SSH connections for script kiddies
# THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE
-A INPUT -p tcp -m state –state NEW –dport 22 -j ACCEPT
# Allow ping
-A INPUT -p icmp -m icmp –icmp-type 8 -j ACCEPT
# log iptables denied calls (access via ‘dmesg’ command)
-A INPUT -m limit –limit 5/min -j LOG –log-prefix “iptables denied: ” –log-level 7
# Reject all other inbound – default deny unless explicitly allowed policy:
-A INPUT -j REJECT
-A FORWARD -j REJECT
COMMIT
测试这个脚本,iptables-restore < /etc/iptables.rule
如果发现iptables-restore v1.x.x: no command specified的错误,就把上面的脚本里面的空行全部删除,然后再重新回车添加
建立开机启动,vim /etc/init.d/start-iptables
#! /bin/sh
### BEGIN INIT INFO
# Provides: custom iptables
# Required-Start:
# Required-Stop:
# Default-Start: S
# Default-Stop:
## Short-Description: custom iptables
### END INIT INFO
/sbin/iptables-restore < /etc/iptables.rule
chmod +x /etc/init.d/start-iptables设置执行权限
rcconf添加这个脚本开机启动
(责任编辑:IT)
debian7配置iptables vim /etc/iptables.rule 文件内容如下 *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn’t use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state –state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You could modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp –dport 80 -j ACCEPT -A INPUT -p tcp –dport 443 -j ACCEPT # Allows SSH connections for script kiddies # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE -A INPUT -p tcp -m state –state NEW –dport 22 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp –icmp-type 8 -j ACCEPT # log iptables denied calls (access via ‘dmesg’ command) -A INPUT -m limit –limit 5/min -j LOG –log-prefix “iptables denied: ” –log-level 7 # Reject all other inbound – default deny unless explicitly allowed policy: -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT 测试这个脚本,iptables-restore < /etc/iptables.rule 如果发现iptables-restore v1.x.x: no command specified的错误,就把上面的脚本里面的空行全部删除,然后再重新回车添加 建立开机启动,vim /etc/init.d/start-iptables #! /bin/sh ### BEGIN INIT INFO # Provides: custom iptables # Required-Start: # Required-Stop: # Default-Start: S # Default-Stop: ## Short-Description: custom iptables ### END INIT INFO /sbin/iptables-restore < /etc/iptables.rule chmod +x /etc/init.d/start-iptables设置执行权限 rcconf添加这个脚本开机启动 (责任编辑:IT) |