CentOS 6.5 部署SaltStack
时间:2016-09-03 23:03 来源:linux.it.net.cn 作者:IT
(1)、python 2.7安装
https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tgz
# tar xvzf Python-2.7.8.tgz
# cd Python-2.7.8
# ./configure --prefix=/usr/local
# make --jobs=`grep processor /proc/cpuinfo | wc -l`
# make install
## 将python头文件拷贝到标准目录，以避免编译saltstack时，找不到所需的头文件
# cd /usr/local/include/python2.7
# cp -a ./* /usr/local/include/
## 备份旧版本的python，并符号链接新版本的python
# cd /usr/bin
# mv python python2.6
# ln -s /usr/local/bin/python
## 修改yum脚本，使其指向旧版本的python，已避免其无法运行
# vim /usr/bin/yum
#!/usr/bin/python --> #!/usr/bin/python2.6
(2)、PyYAML模块安装
http://pyyaml.org/download/libyaml/yaml-0.1.5.tar.gz
https://pypi.python.org/packages/source/P/PyYAML/PyYAML-3.11.tar.gz
# tar xvzf yaml-0.1.5.tar.gz# cd yaml-0.1.5
# ./configure --prefix=/usr/local
# make --jobs=`grep processor /proc/cpuinfo | wc -l`
# make install
# tar xvzf PyYAML-3.11.tar.gz
# cd PyYAML-3.11
# python setup.py install
(3)、setuptools模块安装
https://pypi.python.org/packages/source/s/setuptools/setuptools-7.0.tar.gz
# tar xvzf setuptools-7.0.tar.gz
# cd setuptools-7.0
# python setup.py install
(4)、markupsafe模块安装
https://pypi.python.org/packages/source/M/MarkupSafe/MarkupSafe-0.9.3.tar.gz
# tar xvzf MarkupSafe-0.9.3.tar.gz
# cd MarkupSafe-0.9.3
# python setup.py install
(5)、jinja2模块安装
https://pypi.python.org/packages/source/J/Jinja2/Jinja2-2.7.3.tar.gz
# tar xvzf Jinja2-2.7.3.tar.gz
# cd Jinja2-2.7.3
# python setup.py install
(6)、autocon模块安装
http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
注意：
系统自带的autoconf版本为2.63，在编译ZeroMQ时，由于版本较低，会报错不通过，故需安装大于2.63的版本。
# tar xvzf autoconf-2.69.tar.gz
# cd autoconf-2.69
# ./configure
# make
# make install
如果原来已经装过，还需要覆盖原来的。
cp /usr/local/bin/autoconf /usr/bin/
cp /usr/local/bin/autoreconf /usr/bin/
## 其他依赖库安装
# yum -y install libuuid.x86_64 libuuid-devel.x86_64
# yum -y install uuid.x86_64 uuid-devel.x86_64
# yum -y install uuid-c++.x86_64 uuid-c++-devel.x86_64
https://github.com/jedisct1/libsodium/archive/1.0.1.tar.gz
# tar xvzf libsodium-1.0.1.tar.gz
# cd libsodium-1.0.1
# ./autogen.sh
# ./configure --prefix=/usr/local
# make --jobs=`grep processor /proc/cpuinfo | wc -l`
# make install
./autogen.sh 报错：
Can't exec "aclocal": 没有那个文件或目录 at /usr/share/autoconf/Autom4te/FileUtils.pm line 326.
autoreconf: failed to run aclocal: 没有那个文件或目录
解决方法：
1
yum install automake
报错：
configure.ac:418: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
解决方法：
yum install libtool
http://download.zeromq.org/zeromq-4.0.5.tar.gz
https://pypi.python.org/packages/source/p/pyzmq/pyzmq-14.4.1.tar.gz
# tar xvzf zeromq-4.0.5.tar.gz
# cd zeromq-4.0.5
# ./autogen.sh
# ./configure --prefix=/usr/local
# make --jobs=`grep processor /proc/cpuinfo | wc -l`
# make install
# tar xvzf pyzmq-14.4.1.tar.gz
# cd pyzmq-14.4.1
# python setup.py configure --zmq=/usr/local
# python setup.py install
(7)、M2Crypto模块安装
# yum -y install swig.x86_64
http://www.openssl.org/source/openssl-1.0.1g.tar.gz
# tar xvzf openssl-1.0.1g.tar.gz
# cd openssl-1.0.1g
# ./config shared --prefix=/usr/local
# make && make install
cp -a /usr/local/include/openssl /usr/include/
vim Python-2.7.8/Modules/Setup
# Socket module helper for socket(2)
_socket socketmodule.c timemodule.c
# Socket module helper for SSL support; you must comment out the other
# socket line above, and possibly edit the SSL variable:
#SSL=/usr/local/ssl
_ssl _ssl.c \
-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-L$(SSL)/lib -lssl -lcrypto
取消那四行的注释
# vim/etc/ld.so.conf
/usr/local/lib
/usr/local/lib64
# /sbin/ldconfig
# cd Python-2.7.8
# make && make install
https://pypi.python.org/packages/source/M/M2Crypto/M2Crypto-0.22.3.tar.gz
# tar xvzf M2Crypto-0.22.3.tar.gz
# cd M2Crypto-0.22.3
# python setup.py install
saltstack安装
https://github.com/saltstack/salt/releases/download/v2014.7.0/salt-2014.7.0.tar.gz
# tar xvzf salt-2014.7.0.tar.gz
# cd salt-2014.7.0
# python setup.py install
# salt --versions-report
(责任编辑：IT)
(1)、python 2.7安装 https://www.python.org/ftp/python/2.7.8/Python-2.7.8.tgz # tar xvzf Python-2.7.8.tgz # cd Python-2.7.8 # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install ## 将python头文件拷贝到标准目录，以避免编译saltstack时，找不到所需的头文件 # cd /usr/local/include/python2.7 # cp -a ./* /usr/local/include/ ## 备份旧版本的python，并符号链接新版本的python # cd /usr/bin # mv python python2.6 # ln -s /usr/local/bin/python ## 修改yum脚本，使其指向旧版本的python，已避免其无法运行 # vim /usr/bin/yum #!/usr/bin/python --> #!/usr/bin/python2.6 (2)、PyYAML模块安装 http://pyyaml.org/download/libyaml/yaml-0.1.5.tar.gz https://pypi.python.org/packages/source/P/PyYAML/PyYAML-3.11.tar.gz # tar xvzf yaml-0.1.5.tar.gz# cd yaml-0.1.5 # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install # tar xvzf PyYAML-3.11.tar.gz # cd PyYAML-3.11 # python setup.py install (3)、setuptools模块安装 https://pypi.python.org/packages/source/s/setuptools/setuptools-7.0.tar.gz # tar xvzf setuptools-7.0.tar.gz # cd setuptools-7.0 # python setup.py install (4)、markupsafe模块安装 https://pypi.python.org/packages/source/M/MarkupSafe/MarkupSafe-0.9.3.tar.gz # tar xvzf MarkupSafe-0.9.3.tar.gz # cd MarkupSafe-0.9.3 # python setup.py install (5)、jinja2模块安装 https://pypi.python.org/packages/source/J/Jinja2/Jinja2-2.7.3.tar.gz # tar xvzf Jinja2-2.7.3.tar.gz # cd Jinja2-2.7.3 # python setup.py install (6)、autocon模块安装 http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz 注意： 系统自带的autoconf版本为2.63，在编译ZeroMQ时，由于版本较低，会报错不通过，故需安装大于2.63的版本。 # tar xvzf autoconf-2.69.tar.gz # cd autoconf-2.69 # ./configure # make # make install 如果原来已经装过，还需要覆盖原来的。 cp /usr/local/bin/autoconf /usr/bin/ cp /usr/local/bin/autoreconf /usr/bin/ ## 其他依赖库安装 # yum -y install libuuid.x86_64 libuuid-devel.x86_64 # yum -y install uuid.x86_64 uuid-devel.x86_64 # yum -y install uuid-c++.x86_64 uuid-c++-devel.x86_64 https://github.com/jedisct1/libsodium/archive/1.0.1.tar.gz # tar xvzf libsodium-1.0.1.tar.gz # cd libsodium-1.0.1 # ./autogen.sh # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install ./autogen.sh 报错： Can't exec "aclocal": 没有那个文件或目录 at /usr/share/autoconf/Autom4te/FileUtils.pm line 326. autoreconf: failed to run aclocal: 没有那个文件或目录 解决方法： 1 yum install automake 报错： configure.ac:418: error: possibly undefined macro: AC_LIBTOOL_WIN32_DLL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. autoreconf: /usr/bin/autoconf failed with exit status: 1 解决方法： yum install libtool http://download.zeromq.org/zeromq-4.0.5.tar.gz https://pypi.python.org/packages/source/p/pyzmq/pyzmq-14.4.1.tar.gz # tar xvzf zeromq-4.0.5.tar.gz # cd zeromq-4.0.5 # ./autogen.sh # ./configure --prefix=/usr/local # make --jobs=`grep processor /proc/cpuinfo | wc -l` # make install # tar xvzf pyzmq-14.4.1.tar.gz # cd pyzmq-14.4.1 # python setup.py configure --zmq=/usr/local # python setup.py install (7)、M2Crypto模块安装 # yum -y install swig.x86_64 http://www.openssl.org/source/openssl-1.0.1g.tar.gz # tar xvzf openssl-1.0.1g.tar.gz # cd openssl-1.0.1g # ./config shared --prefix=/usr/local # make && make install cp -a /usr/local/include/openssl /usr/include/ vim Python-2.7.8/Modules/Setup # Socket module helper for socket(2) _socket socketmodule.c timemodule.c # Socket module helper for SSL support; you must comment out the other # socket line above, and possibly edit the SSL variable: #SSL=/usr/local/ssl _ssl _ssl.c \ -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ -L$(SSL)/lib -lssl -lcrypto 取消那四行的注释 # vim/etc/ld.so.conf /usr/local/lib /usr/local/lib64 # /sbin/ldconfig # cd Python-2.7.8 # make && make install https://pypi.python.org/packages/source/M/M2Crypto/M2Crypto-0.22.3.tar.gz # tar xvzf M2Crypto-0.22.3.tar.gz # cd M2Crypto-0.22.3 # python setup.py install saltstack安装 https://github.com/saltstack/salt/releases/download/v2014.7.0/salt-2014.7.0.tar.gz # tar xvzf salt-2014.7.0.tar.gz # cd salt-2014.7.0 # python setup.py install # salt --versions-report (责任编辑：IT) |