创建lvm分区一例

时间:2014-09-18 01:22 来源:linux.it.net.cn 作者:it

创建lvm分区一例

1、添加三块硬盘到服务器

2、用fdisk -l 查看一下分区情况
看到了，刚加的3块硬盘

复制代码代码如下:

Disk /dev/sdc: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdc doesn't contain a valid partition table

Disk /dev/sdd: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdd doesn't contain a valid partition table

Disk /dev/sde: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sde doesn't contain a valid partition table

3、添加三块硬盘
fdisk /dev/sdc
n
p
1
回车（保持默认）
回车保持默认（把所有的硬盘空间都使用）
w
保存退出。
以此类推，把sdd,sde都添加好。

4、重新查看一下磁盘使用情况：

复制代码代码如下:

[root@sendmail ~]# fdisk -l
Disk /dev/sda: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          13      104391   83 Linux
/dev/sda2              14        1044     8281507+ 8e Linux LVM

Disk /dev/sdb: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 1 130 1044193+ 82 Linux swap / Solaris

Disk /dev/sdc: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 1 130 1044193+ 83 Linux

Disk /dev/sdd: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdd1 1 130 1044193+ 83 Linux

Disk /dev/sde: 1073 MB, 1073741824 bytes
255 heads, 63 sectors/track, 130 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sde1 1 130 1044193+ 83 Linux
[root@sendmail ~]#

5、内核重新载入三块磁盘的分区表

复制代码代码如下:

	[root@sendmail ~]# kpartx -a /dev/sdc

	[root@sendmail ~]# kpartx -a /dev/sdd

	[root@sendmail ~]# kpartx -a /dev/sde

6、pvcreate
7、vg
8、lv

9、格式化三个分区

复制代码代码如下:

	mkfs.ext4 /dev/sdc1

	mkfs.ext4 /dev/sdd1

	mkfs.ext4 /dev/sde1

(责任编辑：IT)